Find in Mercanautic many references of anodes made of zinc, aluminum, and magnesium alloy to replace the anodes of the hull and the shaft of your motor, either inboard or outboard.
€2.00 - €87.00
The function of the anodes is to protect the parts from corrosion. Therefore, they have to be changed at least every season. In harsher sea conditions, more frequent replacement is essential. The anodes are along the keel, at the rudder and propeller shaft.
Be careful never to paint, brush, or grease your anodes! They would lose their electrical conductivity with water and therefore could no longer perform their corrosion protection function. In addition, if the boat is out of the water for a long time, a layer of oxidation can be formed (especially on the aluminum anodes) and cause a loss of performance. In these cases, they have to be changed to protect the parts and the boat engine adequately.
Association table for the choice of anodes (in kg), according to the corresponding metal surface to be protected: Metal surfaces in m2 / Zinc anodes in kg
5 to 10 m2 / 5.5 kg
10 to 20 m2 / 9.5 kg
20 to 30 m2 / 18.0 kg
30 to 40 m2 / 20.0 kg
40 to 50 m2 / 25.0 kg
Shaft and rudder anodes, Propeller anodes, Propulsion anodes, Mooring anodes, Engine anodes, Welding anodes, Bolt-on anodes, Switchboard anodes, Heat exchanger anodes, Aluminum anodes, Special anodes for boats aluminum,
Most popular products:
Honda anodes, Suzuki anodes, Johnson anodes, Mercury anodes, Tohatsu anodes, Volvo anodes, Yamaha anodes, Yanmar anodes, Vetus anodes, Selva anodes, internal rear panel of anodes, 115 / 225HP HB Yamaha anodes, 100mm height mercury anodes, HB OMC Yamaha / Honda anode plate, 60 / 140hp hb Tohatsu anodes, Vetus anode washer, 40X20-M8 Yanmar anodes, 25 shaft nut, Suzuki anode washer, Volvo plate seal zinc anodes, 250 base anodes 270-275-280-285 Volvo, OMC inner anode, Suzuki 20/25 / 30HP anodes, Yanmar anode, 25-40HP Tohatsu anode, 2.6kg Vetus bolted plate anodes, anode collector, external anode kit for Yamaha, OMC internal anode, 55HP HB Yamaha anodes, mercury base plate anode, Volvo anode square trim, Suzuki 75-85-90HP anode, Yanmar 75X14 anode washer, Vetus bolt-on anode plate, 50 anode plate / 140HP Tohatsu, platinum anode FB 8 / 20hp Honda, universal bar 40HB and up, stern anodes, anode HB OMC, 60-90HB Yamaha anode, mercury anode nut, Volvo anode, Suzuki anode plate, Yanmar type anodes, Vetus long anodes, 20mm Yanmar / Tohatsu circular anode, 10 / 50HP Honda platinum anodes, 9.9 HP anodes , OMC HP anode, 40-60HP Yamaha anode, 10X40 Volvo collector anodes, mercury derived anodes, Suzuki anode block, 20/25 / 30CV Yanmar type anodes, 24mm Yanmar / Tohatsu circular anode, etc.